The Next Generation in Interior Floor Coatings
ECO Friendly, LEED Approved,  
waterborne floor coatings by KraGil Inc.

Maintenance click here for the WearMax informational video

Your WearMax Finish is Easy to Keep Clean

Wood Floor cleaning instructions:

  • Blot Up spills and spots immediately
  • Dust mop the floor to minimize abrasive grit and dirt at least three times per week
  • DO NOT apply anything to the dust mop
  • Occasionally wipe the floor with a dampened micro fiber mop such as a swiffer
  • The less water, the better
  • The more use your floor gets, the more often, but at least once a week
  • Periodically clean the floor with a neutral cleaner for ceramic-based finishes, (Note: neutral cleaners do not leave a film. Do not use wax, polish or abrasive cleaners, steel wool or scouring powder, vinegar, ammonia, or anything other than soft water


VCT cleaning instructions for large public facilities:

  1. Blot Up spills and spots immediately
  2. Dust floors daily with a micro fiber mop spritzed with water to minimize abrasive grit and dirt daily.
  3. When cleaning with walk behind or riding floor scrubbers equipped with a white scrub pad or brush, fill tank with soft water and go.
  4. In facilities that use Quaternary disinfectants, sanitize as mandated.
  5. As qua ternaries (quads) can build up by mandated sanitizing solutions which attract dirt and dust and turn floors yellow, (a noticeable buildup can occur approximately every 30- 90 days). To remove these quads, flush your cleaning machines tank thoroughly of these sanitizing solutions with water. A solution of a neutral cleaner such as Emerge by FranMar should be mixed as directed and applied to remove this film. (Note: neutral cleaners do not leave a film.)