The Next Generation in Interior Floor Coatings
ECO Friendly, LEED Approved,  
waterborne floor coatings by KraGil Inc.


  • Site applied water based
  • Ceramic Product
  • Water borne technology
  • Low Odor
  • Low VOC (under 125)
  • Superior abrasion resistance
  • Superior mar and scratch resistance
  • Superior slip resistance
  • Superior resistance against chemicals like disinfectants (excluding Iodine and Hair dye)
  • Three step application process (Primer, Ceramic Armor, Shield)
  • For commercial applications and all heavy traffic areas Professional Shield needs to be catalyzed with WearMax Cross-linker
  • Clear appearance
  • Three different gloss values available (Matte 18-22, Satin 40-45, Gloss 55-60)
  • Complete Floor finish System for commercial applications
  • WearMax Professional is meant to be applied on Vinyl, Linoleum, VCT, Rubber, Granite, Marble, Terrazzo and (Polished Concrete epoxy sealed first).
  • Covered by 3-Year commercial and lifetime residential warranty against wear through*

* Warranty valid if the coating is applied by a contractor that is certified by Trustor Coatings or Kragil Inc. or certified training instructor from either manufacturer.

For a closer look at the WearMax Professional product check out this video: click here


WearMax Professional finish is a uniquely different finish formulated expressly for the commercial environment. It has the industry’s only written commercial warranty against wear through. KraGil Inc has trained specialists who have been certified by the factory to apply this special coating system. They are a highly skilled group of technicians who take pride in their work. WearMax Professional must be applied by one of these trained specialists in order for the warranty to be valid. A signed copy of the warranty must be on record at KraGil Inc. at its corporate office in Center City, Minnesota. This is our assurance that only the properly qualified technicians will be on the job. You can get a listing of technicians on our Certified Contractor's page.

WearMax Professional System is a three step system. WearMax Professional Adhesion Primer, one coat of WearMax Professional Armor, and one coat of catalyzed WearMax Professional Shield. One, two, three, you can have foot traffic 5 hours after the last coat is applied in most cases.

CAUTION: WearMax Professional contains small amounts of N-methyl-2-Pyrrolidone and Glycol ethers. Do not breathe vapors or spray mists. Wear appreciate, properly fitted respirator. Avoid contact with eyes, skin and clothing. Change clothing immediately when contaminated. Wash thoroughly after use. Use with adequate ventilation. Keep container closed when not in use. Do not store above 120° F.


KraGil Inc. recommends some general maintenance guidelines. However, every environment is 
different, and we encourage all of our users to call KraGil Inc. for individual maintenance
recommendations that may better suit their needs.

  • Use quality walk off mats in entry ways or areas where grease build up may occur. This may also help to prevent grit from damaging your floor.
  • Use felt furniture rests on all furniture. As a rule of thumb, the heavier the furniture, the wider the floor protector should be. Felt rests are your best choice. Replace them every 4-6 months for best results.
  • Use only WearMax cleaner as recommended for your regular maintenance. It is specially formulated for WearMax.
  • Avoid sharp objects such as stiletto heels, pet nails, or unprotected furniture legs. All wood will dent and all finishes can be scratched.
  • When moving heavy objects do not slide them across the floor. Picking them up and setting them down is the best method. If that is not possible, then always put down a panel on top of finished surfaces first to protect the floor, and to move the object across the panel.

The WearMax Warranty

The WearMax Professional Ceramic finish is warrantied against wear through to the substrate for 3 years from date of application Commercially and Lifetime Residential Warranty subject to the following conditions:The finish must be applied by a factory trained and certified technician. You can call KraGil Inc. for a current list of certified contractors in your area. 


What is NOT covered by the warranty

KraGil Inc. warranties do not cover indentations, scratches, or damage caused by negligence, or water saturation. The warranty does not cover any alteration to the product, material applied by a non-certified contractor, improper maintenance, insufficient protection, or exposure to extreme heat or cold for a period of 72 hours or more (below 50 degrees Fahrenheit and above 90 degrees Fahrenheit).

This warranty is the complete and exclusive statement of the warranty, and is in lieu of all other express and/or statutory warranties. KraGil Inc. assumes no liability for incidental or consequential damages.

KraGil Inc.'s responsibility is limited to the cost of the finish if wear through occurs in 10% of the area coated with WearMax Professional Ceramic Finish.

If You Have a Warranty Claim

Contact KraGil Inc. Customer Service Center 612.605.1864 during normal business hours. Please be prepared to give the Customer Service Specialist information related to your purchase, such as product number, purchase date, retailer name and address and telephone number. You will receive additional instructions for filing the claim at the time of your call.


  • The finish must be maintained as recommended by KraGil Inc.
  • The Surface wear must not have occurred as a result of improper maintenance, or damage caused by denting, scratching, or cutting.
  • The surface wear must be readily visible in 10% of the area coated with WearMax Professional Ceramic finish.
  • The Commercial projects must be approved in writing in advance by KraGil Inc. or KraGil Inc. has the right to refuse the warranty.

Technical Data Sheets (TDS)